Bridge Characteristics; Performance; Approvals - 3Com OfficeConnect Remote 510 User Manual

B-2 T I
ECHNICAL NFORMATION

Bridge Characteristics

802.3 MAC layer bridge.
802.1D spanning tree algorithm.
Support for bridge triangulation and link load
sharing.

Performance

LAN filtering rate: 10000 frames per second.
LAN forwarding rate: 4000 frames per second.
ISDN and WAN forwarding rates are dependent on
the link speed.

Approvals

This product ostensibly complies with the
electro-magnetic compatibility (EMC) requirements
of EN 55022 Class A and EN 50082 (susceptibility).
However, to fully comply with Class B of EN55022 the
following prerequisites should be observed:
The WAN port must be attached to a screened digital
cable.
The ISDN cable must be used in conjunction with a
three turn ferrite.
The product carries the CE certification mark to
indicate conformance with the following EU directives:
LVD (Low Voltage Directive (Safety) 73/23/EEC.
EMC (Electro Magnetic Compatibility) Directive
89/336/EEC.
TTE (Telecommunication Terminal Equipment)
Directive 91/263/EEC.
The product conforms to I-CTR3 (based on NET3 –
ISDN interface).