Iom Fan Replacement - Western Digital Ultrastar Data60 User Manual

3. Support
User Guide

3.5 IOM Fan Replacement

Figure 53: Installing the Rear Fan
Step 4 : Make sure the CMA(s) is in operational position by folding the arm(s) in toward the enclosure and
attaching the elbow end(s) to the connector(s) attached to the rail. Verify that all of the cabling is
in functional order and does not bind or catch.
3.5 IOM Fan Replacement
Replacement Requirements
Personnal Required 1
Avg. Replacement Time 1 min
Max Replacement Time 5 min
Required vs.
Tool # Needed
Recommended
None N/A N/A
Step 1 : Grasp both handles at the front of the enclosure and pull with even pressure to extend the
chassis out of the rack until it is stopped by the safety latches. The safety latches will prevent the
enclosure from coming out of the rack completely and the cover will remain in the rack attached
to the rear alignment brackets.
69