Western Digital Ultrastar Data60 User Manual page 247

User Guide
f. Close all of the baskets.
g. Reconnect the CMA at the elbow to the connectors on the rail.
Step 3 : Cable the upper CMA.
a. Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button
that says "push" to unlatch it.
b. Gather the SAS cables, one power cable, and one Ethernet cable to install in the left hand
side.
c. Open all of the baskets
Figure 224: Nominal Cable Length at Connectors
4. Management
4.9 Daisy Chaining
235