User Guide
Figure 168: Lower CMA Orientation
c. Slowly slide the enclosure forward to ensure the arm is operating properly, then slide it back
into the rack.
a. Repeat these steps to install the upper arm with the elbow facing to the right.
Step 45 : Install the crossbar onto the CMA mounting bracket.
a. Align the crossbar with the mounting peg facing down and pointing toward the CMA
mounting bracket.
Figure 169: Initial Alignment
b. Insert the peg on the underside of the crossbar into the slot on the CMA mounting bracket.
3. Support
3.9 Chassis Replacement
146