Western Digital Ultrastar Data60 User Manual page 143

User Guide
Figure 145: Remove Inner Rail
b. Locate and unlatch the springlock on the side of the inner rail.
Figure 146: Inner Rail Spring Latch
c. Slide the inner rail toward the front of the enclosure to unlock it from the pegs that secure it
to the sidewall and pull it free.
Note: Follow the next step if the cable tray was installed.
Step 24 : Uninstall the Cable Tray by removing the M3 x 8mm screws using the long T10 Torx head
screwdriver.
3. Support
3.9 Chassis Replacement
131