Windows Upgrade To New Firmware - Western Digital Ultrastar Data60 User Manual

Hide thumbs Also See for Ultrastar Data60:
Table of Contents

Advertisement

User Guide
Step 5 : To determine which IOM is which, use the <dev> string with the sg_ses command.
Step 6 : The following upgrade preparation steps apply only to firmware versions 01XX-XXX or if the
user is upgrading via OOBM. If this does not apply, please proceed to the upgrade procedure.
a. IMPORTANT: There is a firmware upgrade requirement which requires both Ethernet
interfaces be connected to obtain the IP addresses via DHCP prior to starting the upgrade
process. The Ethernet ports are shown in the following image:
Figure 196: Ethernet Ports ( IOM A port magnified)
b. After connecting both Ethernet interfaces and obtaining the IP addresses via DHCP, locate
the
c. Verify that both OOBMs have IP addresses by issuing the command
d. Locate the IP addresses in the Enclosure Services Controller Electronics (ESCE) elements,
indicated by the
Element type: Enclosure services controller electronics, subenclosure id:
0 [ti=5]
Overall descriptor: <empty>
Element 0 descriptor: ESCE IOMA,IOM PART NUM ,IOM SERIAL
NUM,5000CCAB0500003C,XXX.XXX.XXX.XXX
Element 1 descriptor: ESCE IOMB,IOM PART NUM ,IOM SERIAL
NUM,5000CCAB0500007C,XXX.XXX.XXX.XXX
4.3.6   Windows Upgrade to New Firmware
To download the new firmware package, do the following:
Note: If the Ultrastar Data60 is connected to an HBA that does not present the
Enclosure Services Processor to the host for management purposes, Western
Digital recommends attaching the Ultrastar Data60 to a host that does expose
the Enclosure Services Processor so that the upgrade may be performed.
Attention: Beginning with firmware version 2000-073, the user may upgrade in-
band via sg_ses_microcode without the requirement of having Ethernet interfaces
actively configured with DHCP. Please proceed to the upgrade procedure.
device name from the
<dev>
XXX.XXX.XXX.XXX
output from step
sg_scan -s
in the results, as shown in the following example:
4. Management
4.3 Firmware Upgrade
4 (page
169).
sg_ses <dev> -p0x7
.
170

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H4060-j

Table of Contents