Solo Mode; Specifications - Midas DP48 Quick Start Manual

24 DP48

SOLO mode

To help with identifi cation, DP48 will automatically solo the audio for specifi c functions and under specifi c conditions,
such as the following:
·
ASSIGN—While assigning input channels to a Group, the selected input channel will be soloed for easy
identifi cation. When you exit ASSIGN, the channel solo will be deactivated automatically.
·
EDIT—While editing the Group mix of the assigned input channels, the selected Group will be
soloed automatically. When you exit EDIT, the Group solo will be deactivated automatically.
·
Group Processing—If you wish to listen to a Group in solo, e.g., to adjust that Group's processing, just press
and hold the respective GROUPS 1-12, MIC or AUX IN buttons. That button's LED will begin fl ashing, and the Group
display will show a yellow "S" above the group number.
Solo Mode will also behave in the following ways:
·
When you switch to a diff erent Group or select the MIC or AUX IN buttons while in Solo Mode, the solo will follow
your selection to the newly-selected Group or input.
· When you de-select the soloed Group or press any other button, such as MIX A/MIX B or SETUP, the solo is switched
off automatically.
·
You can also press and hold the soloed Group button again to switch off the solo.
Specifi cations
Connections
Phones Mix A / B 2 x ¼ " TRS, stereo, unbalanced, 25 Ω
Line Mix A / B 2 x ¼ " TRS, mono, balanced, 1 kΩ
2 x ¼ " TRS, mono, unbalanced, 500 Ω
Aux in 2 x ¼ " TRS, unbalanced, 20 kΩ
2 x ¼ " TRS, balanced, 40 kΩ
AES50 Thru / In 2 x RJ45
Equalizer
Low ±15 dB, semi-parametric, low shelving
Mid ±15 dB, semi-parametric, peak
High ±15 dB, semi-parametric, high shelving
Frequency 20 Hz to 22 kHz, adjustable
Output
Limiter Ratio ∞:1
Level, max. +12.8 dBu (Phones)
Mix A / Mix B 2 x stereo
AES50
Audio channels @ 48 kHz 48
Sample rate 44.1 / 48 kHz
Sample word length 24 bit
Clock synchronization AES50 IN
Latency min. 70 μs per node (AES50)
Cable Ethernet CAT 5e
Cable length max. 100 m
Data / Rec
SD/SDHC format FAT32
Card memory Up to 32 GB supported
Power Supply
AES50 input PoE (IEEE802.3af)
Power consumption max. 14 W (with DC adaptor)
Mains connection External power supply 24 VDC / 600 mA (included)
Dimensions / Weight
Dimensions (H x W x D) 69 x 242 x 164 mm (2.72 x 9.53 x 6.46")
Weight 1.3 kg (2.9 lbs)
Quick Start Guide 25