Reading The Screen (Lcd) - GRAPHTEC LABERLROBO DLC1000 User Manual

Reading the Screen (LCD)

Name of the button or corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the item is selected.
READY screen
(READY)
READY screen (READY)
The following items are displayed in the basic screen (READY).
The Condition No. (Cutting conditions) that has been set is displayed.
Supplement
•
In this manual, this basic screen is referred as READY status.
•
MENU screen (MENU)
CUT CONDITION & TEST screen (COND/TEST)
MENU screen
(MENU)
Display the current cutting conditions.
CROSS CUT
Media feed (FEED)
Set the various conditions.
Set the cutting condition and cutting
test, etc.
2-7
CUT CONDITION & TEST screen
(COND/TEST)