When Cutting The Desired Rounded Rectangle (Label Test 4 Sheets) - GRAPHTEC LABERLROBO DLC1000 User Manual

6
Press the POSITION (
the position to perform the CUT TEST.
7
Only one test cut pattern is cut.
8
The CUT TEST screen is displayed.
9
It will return to READY screen.

When Cutting the Desired Rounded Rectangle (Label test 4 sheets)

Operation
1
Load the media for test cutting in the machine.
2
CUT CONDITION & TEST screen is displayed.
) keys to move the tool carriage to
Push roller
Label test 4 sheets
2-73
Supplement
It is impossible to move to the feeding
direction (X-axis movement) by
operating the POSITION (
CAUTION
carriage. Take care to ensure that you do not cut
Supplement
push roller.
Media feeding direction
) keys.
)