Dhcp Settings - GRAPHTEC LABERLROBO DLC1000 User Manual

DHCP settings

your equipment manual or consult your network administrator.
The default setting of the DHCP is "Off".
Operation
1
MENU screen is displayed.
2
Press the POSITION (
I/F(LAN) screen is displayed.
3
Press the POSITION (
DHCP screen is displayed.
4
Press the POSITION (
"OFF" (disabled).
(When the DHCP is set to "ON" (enabled), it takes time to
reset)
5
I/F(LAN) screen is displayed.
6
It will return to READY screen.
) keys to select the I/F (LAN) (The
) keys to select the DHCP.
) keys to select "ON" (enabled) or
5-4
Supplement
The current DHCP settings are displayed on the
right side of the "DHCP" screen.
Supplement
screen without changing the settings.