GRAPHTEC LABERLROBO DLC1000 User Manual page 10

Precautions on the Handling of Cutter Pens
This product uses a cutting blade. To prevent injuries (when replacing the cutter blade, installing the cutter pen,
etc.), take the following precautions when handling the cutter blade.
Cutter Blade
Return used blades to the accessory cutter blade case and throw them all out together when the whole case has
Cutter Pen
The tip consists of a sharp blade. Do not extend it too far. Moreover, the tip of cutter blade is sharp. When you
are not using the cutter pen, make sure that the blade is fully retracted.
After Mounting the Cutter Pen
After the power has been turned on, and during operation, do not touch the pen tip. It is dangerous.
Blade tip
Cutter blade
II