GRAPHTEC LABERLROBO DLC1000 User Manual page 12

This document contains precautions to be adhered to upon using this product. Please read it carefully prior to use.
Safety Precautions for Attaching Labels
Various functions and attributes of the label may differ depending on the conditions of the environment in which it
is used.
out of the resin could enter the label and cause it to soften.
The following measures are not covered in the warranty.
• Use strong pressure when applying by hand.
• Change to composite paper instead of an aluminum evaporator coil mat such as the FNS KESHI N25.
• Apply strong adhesion for adhesive materials.
Usage Environment
When printing is carried out in a hot and humid environment, this may cause the label materials to change and
become defective, and the separator winder to become faulty.
Please refrain from using in a hot and humid environment.
Media
When using label materials that have been stored for a long period of time in the low-temperature environment of
a warehouse, leave them in a normal-temperature setting at least half a day before usage as the print quality is
reduced when the central interior portion of the material is chilled.
Consumable Parts
The cross cutter unit and slitter unit are consumable parts. They are consumed as they are used, and must
eventually be replaced.
After Use
After use, cover the main unit with the soft cover supplied or a cloth to keep dust off.
Usage
IV