GRAPHTEC LABERLROBO DLC1000 User Manual page 157

Items
Cutting section
Cutout system
Cutter type
Drive system
Force
Maximum cut area
Maximum cut speed
Interface
LCD display
Rated power supply
Power consumption
Usage environment
Conditions for guaranteed precision
External dimension (approximate)
Weight (approximate)
*1: When setting media for long-plotting.
of improvements, etc.
DLC1000
Half cut using blade (Supersteel)
Supersteel
Digital servo
0.2 to 2.9N (20 to 300gf): 31 steps
Expand Mode : 203mm×1200mm
Normal Mode : 186mm×1200mm
600mm/s
USB2.0 (Full Speed), Network (Ethernet 10BASE-T/100BASE-TX)
Graphic Type (128dots×64dots):
170VA or less
10 to 35°C, 35 to 70% R.H. (non-condensing)
16 to 32°C, 35 to 70% R.H. (non-condensing)
1904×994×1297mm
151kg
A-3
(Slitter cannot be used.)
21 (characters) x 7
www.delinit.by