Ip Filter Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Enter the IP address or network address that will be used in the IP filter rule. In the following example, if the IP addresses 192.168.70.66 or
192.168.70.0 are entered, they would be inaccessible to wireless clients on the same network.
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to select the SSID for
SSID Index
the IP filter.
Click the drop-down menu to enable or disable
Filter State
the filter state. By default this feature is disabled.
Enter the IP address or network address to apply
IP Address
the filter settings.
Enter the subnet mask of the IP address or
Subnet Mask
networks address.
When an IP address is entered, it appears in the
IP Address List
list.
Highlight a IP address and click Delete to
remove it from the list.
To upload a IP filter list file, click Choose File
Upload IP Filter File
and navigate to the IP filter list file saved on the
computer, and then click Upload.
To download IP Filter list file, click Download
Download IP Filter File
and to save the IP filter list.
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

IP Filter Settings

73