Control; Url Filter - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Control

This menu is designed to create restrictions on access to certain web sites.

URL Filter

On the pages of the Control / URL filter section, you can specify restrictions on access to certain
web sites.
To enable the URL filter, select the Enable/Disable URL filter checkbox on the Control / URL
filter / Configuration page, then select a needed mode from the URL filter type drop-down list:
Block listed URLs: when this value is selected, the access point blocks access to all
•
addresses specified on the Control / URL filter / Configuration page;
Block all URLs except listed: when this value is selected, the access point allows access
•
to addresses specified on the Control / URL filter / Configuration page and blocks
access to all other web sites.
Click the Apply button.
To specify URL addresses to which the selected filtering will be applied, go to the Control / URL
filter / URL addresses page.
Figure 195. The Control / URL filter / Configuration page.
Page 252 of 270
Configuring Device (Router Mode)