D-Link DAP-2610 User Manual
Status:
Public Community String:
Private Community String:
Trap Status:
Trap Server:
Status:
LED Status:
Check the box to enable the SNMP
functions. This is enabled by default.
Enter the public SNMP community string.
Enter the private SNMP community
string.
Check the box to enable the trap status.
Enter the trap server IP address. This is
the IP address of the SNMP manager that
will receive traps sent from the wireless
access point.
Ping Control Setting
Check the box to enable Ping control.
Ping works by sending ICMP "echo
request" packets to the target host and
listening for a response.
Click On or Off to enable or disable the
LED status display.
SNMP Settings
LED Setting
78