Snmp Settings; Ping Control Setting; Led Settings - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
Status
Check the box to enable the SNMP functions.
Public Community String Enter the public SNMP community string.
Private Community Enter the private SNMP community string.
String
Trap Status Check the box to enable the trap function.
Trap Server Enter the trap server IP address.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Status
Check the box to enable the ping control
setting.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
LED Status
Click the radio button to select the LED on or off.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-2680 User Manual

SNMP Settings

Ping Control Setting

LED Settings

81