Back Panel - D-Link DAP-1360 User Manual

Wireless n300 access point & router
Hide thumbs Also See for DAP-1360:
Table of Contents

Advertisement

DAP-1360 Wireless N300 Access Point & Router
User Manual

Back Panel

Name
WPS
RESET
INTERNET
LAN
12 VDC IN
ON/OFF
The device is also equipped with two external Wi-Fi antennas.
Figure 2. Back panel view.
A button to restore the factory default settings and to quickly add
wireless devices to the access point's WLAN (the WPS function).
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The WPS LED should start
blinking.
To restore the factory defaults: with the device turned on, push the
button, hold it for 10 seconds, then release it.
A port to connect
to a cable or DSL modem or to a private Ethernet
line
(it is recommended to use the cable included in the delivery
package).
An Ethernet port to connect to a computer.
Power connector.
A button to turn the access point on/off.
Page 11 of 270
Description
Overview

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents