Table of Contents
Advertisement
This chapter contains information of the installation and initial setup and
operation of the FlarePro including the following:
•
Electronics Installation and In-Line Connections
•
Outside Enclosure Connections
•
Sampling Setup and Communication Setup
Please refer to the drawing and information provided in Chapter 1 for
an overview of the FlarePro (Dimensions, utilities, etc.).
Electronics and Sensor
INSTALLATION
Do not open the enclosure unless the area is known to be free of
flammable materials, or unless all devices within have been de-
energized for at least 30 minutes.
Before connecting the 24 VDC power to the electronics, ensure
that the electronics are connected to the sensor. Otherwise, damage
to the electronics is possible.
Always remove 24 VDC power from the electronics before
disconnecting the electronics from the sensor.
|
Installation
3-1
Advertisement
Table of Contents
Troubleshooting
