Figure 1-4.
Power and Signal
Distribution panel.
1-12 | FlarePro Process Mass Spectrometer
Electrical and Controls
Electrical power is delivered to the unit through the terminal box
mounted on the right-hand side of the unit. All power and electrical
signals must be delivered to the unit per local requirements for
hazardous locations.
Power and Signal Distribution System
The power and signal distribution panel
are located inside the main enclosure.
The power panel contains two main DC
power supplies, an over/under-
temperature system and various other
components needed to operate the
analyzer.
•
Power supplies
•
Relay
•
Terminal Blocks
•
Temperature controllers
•
I/O Racks
•
Line Filter
•
Thermal Cut-Off for Inlet Heater