FlarePro Overview
1-6 | FlarePro Process Mass Spectrometer
The FlarePro consists of the following subsystems:
•
Weatherproof Stainless Steel, Purged Enclosure
•
Mass Spectrometer
•
Heated Sample Inlet System
•
Electrical and Controls System
•
Vacuum Pumping System
•
Cooling System
•
I/O Data Acquisition Option
Installation Clearance Requirements
•
Allow 36" minimum clearance front of unit for service access
(20" minimum for door swing).
•
Allow 24" minimum clearance on top of unit for service access.
•
Allow 20" minimum clearance on right side of unit for conduit.
General FlarePro installation information, such as dimensions
and utility requirements, for the 16-valve and 24-valve
versions are included in the following pages. Use the
information as it applies to your analyzer.
Refer to the Customer-Specific drawings shipped with your
system for complete details about your system.