Add Display For Digital Module - Ametek FlarePro User Manual

Figure 6-4.
I/O Setup tab,
Device Properties
screen.
Figure 6-5.
Mode display
example.
6-12 | FlarePro Process Mass Spectrometer
Click the I/O Setup tab for each module position and enter the Type and
4.
Name (see example in Figure 6-4).
5. Continue with "Add Display for Digital Module" to create displays
where you can view data.

Add Display for Digital Module

To create displays so that you can view the data being monitored:
1. To create displays so that you can view the data being monitored, go
to the mode display where you want your information viewed (see
example in Figure 6-5). To do this, right-click one of the display
screens.