System Alarms Display Map - DPS Telecom NetGuardian 832A G5 User Manual

85
57
58
59
60
61
62
63
64
4.1.1

System Alarms Display Map

See Table A.3 for detailed descriptions of the NetGuardian's system alarms.
Displa Points Alarm Point
y
1-16 Control
Relays
17 Timed Tick
Exp. Module
18
Callout
Network Time
19
Server
11
Accumulation
20
Event
Duplicate IP
21
Address
NetGuardian DX 2 fail
NetGuardian DX 3 fail
GLD/BSU 1 fail
GLD/BSU 2 fail
GLD/BSU 3+ fail
Chan. Port Timeout
Craft Timeout
Event Que Full
Table A.2 Display 11 System Alarms point descriptions
Description
Reserved by system for control
relays.
Toggles state at constant rate as
configured by the Timed Tick timer
variable. Useful in testing integrity
of SNMP trap alarm reporting.
Alarm is triggered whenever an
alarm point from an Entry Control
Unit (ECU) is collected. A
notification event may be
associated with the alarm to force
a call out or trap.
Communication with Network Time
Server has failed.
An alarm has been standing for the
time configured under Accum.
Timer. The Accumulation timer
enables you to monitor how long an
alarm has been standing despite
system reboots. Only the user
may reset the accumulated time, a
reboot will not.
The unit has detected another node
with the same IP Address.
8697 9697
8698 9698
8699 9699
8700 9700
8701 9701
8702 9702
8703 9703
8704 9704
Solution
Reserved by system for control
relays.
To turn the feature off, set the
Timed Tick timer to 0.
Disable Building Access Control
(BAC) by setting the BAC Unit ID to
0. If Building Access is being used,
then investigate the ECU alarm
source or don't associate
notification with the alarm event.
Try pinging the Network Time
Server's IP Address as it is
configured. If the ping test is
successful, then check the port
setting and verify the port is not
being blocked on your network.
To turn off the feature, under
Accum.Timer, set the display and
point reference to 0.
Unplug the LAN cable and contact
your network administrator. Your
network and the unit will most likely
behave incorrectly. After assigning