Entering System Settings - DPS Telecom NetGuardian 832A G5 User Manual

5
2.3

Entering System Settings

Use the following steps to define your NetGuardian system information:
1. From the Edit menu choose System, see Figure 2.2.
2. Enter the designated user name for your NetGuardian.*
3. Enter the location or address of the NetGuardian.*
4. Set the contact by entering the telephone number or other contact information for the person or
group responsible for this NetGuardian.
5. The Features field is used for entering feature codes for future upgrades. Do not change this code
unless instructed by DPS Technical Support.
6. Click Submit to save your system information settings.
* If using email pager type refer to Section 2.5 for correct name and location field formatting.
Fig. 3.2. Configure the system information by selecting the System screen from the Edit menu
Field
Name
Location
Contact
Phone
Features
Unit ID
Used to set the Name@Location email address.
Note: Name is the portion before the @ character.
Used to set the Name@Location email address.
Note: Location is the portion after the @ character, this is a host name or IP
Information for how to contact the person responsible for this NetGuardian.
Used for entering feature codes for future upgrade features.
User definable ID number for this NetGuardian (DCP Address).
Description
address.
Contact's telephone number.