Network Time Protocol Support; Configuring Dscp Devices - DPS Telecom NetGuardian 832A G5 User Manual

2.18.1

Network Time Protocol Support

Fig. 2.35. Configure the Network Time Protocol feature in the Date and Time screen
1. From the Edit menu select Date and Time.
2. Click on the Time Zone drop-down menu and select the appropriate time zone.
3. Put a check next to Observe DST if you are in an area that observes daylight saving.
4. You may also change the server IP Address that the NetGuardian syncs with by entering a the
appropriate IP address in the Time Server IPA field.
5. If you do not want your NetGuardian to sync with an NTP server, simply set the Time Server IPA to
255.255.255.255.
Note: If Time Server IPA is set to 255.255.255.255, you will be able to manually adjust the date and
time.
6. Click Submit Data to save the date and time settings.
2.19

Configuring DSCP Devices

Note:
If configuring the Wireless Propane Sensor please reference the How to configure on the
NetGuardian G5 Web Interface section in the "Wireless Propane Monitoring" user manual.
If configuring the Wireless Extender for Propane Sensor please reference the How to configure
on the NetGuardian G5 Web Interface section in the "Wireless Extender for Propane Sensor"
user manual.
60