Configuring Modem Port Settings - DPS Telecom NetGuardian 832A G5 User Manual

21
2.5.5

Configuring Modem Port Settings

Use the following steps to configure the modem port settings. Default for these fields is blank.
1. From the Edit menu > Ports screen, scroll to the Modem section, see Figure 2.10.
2. In the Ring Count field enter the number of rings before answering. (Default = 1)
3. The Dial Init and the Answer Init fields can be used if any other modem initialization settings need
to be set. For example, the modem can be set to ignore the dial-tone by entering a character code in
either the Answer Init (into the NetGuardian) or the Dial Init (out from the NetGuardian).
4. Click Submit Data to save your modem port settings.
Fig. 2.10. Change the modem settings from the Edit menu > Ports screen
Command
A
Bn
P
T
R
D W
,
@
!
;
En
Hn
In
Ln
Mn
On
Qn
Sr?
Sr=n
Vn
Xn
Z
Description
Answer command
Select communications standard
Dial
Pulse dial
Tone dial
Connect as answering modem
Wait for dial tone
Pause for the duration of S8
Wait for silence
Switch hook flash
Return to the command state
Command echo
Switch hook control
Modem identification
Speaker volume
Speaker activity
Online
Responses
Interrogate register
Set register value
Result codes
Result code set
Reset
Table 2.F. Standard modem commands (Hayes)
Modem commands may vary. See
your modem user manual for
commands specific to your modem.
If you set the ring count to 0, the
NetGuardian will still be able to dial
out for notifications, but will NEVER
answer an incoming call.