DPS Telecom NetGuardian 832A G5 User Manual page 2

Revision History
March 6, 2020
December 11, 2019
November 15, 2019
October 21, 2019
March 5, 2019
August 2, 2018
May 18, 2018
September 6, 2017
December 7, 2016
May 20, 2016
April 30, 2015
January 26, 2015
October 17, 2014
November 25, 2013
November 19, 2013
October 21, 2013
July 25, 2013
...
October 6, 2011
This document contains proprietary information which is protected by copyright. All rights are reserved. No part of
this document may be photocopied without prior written consent of DPS Telecom.
All software and manuals are copyrighted by DPS Telecom. Said software and manuals may not be reproduced,
copied, transmitted or used to make a derivative work, by either mechanical, electronic or any other means in whole
or in part, without prior written consent from DPS Telecom, except as required by United States copyright laws.
© 2020 DPS Telecom
Notice
The material in this manual is for information purposes and is subject to change without notice. DPS Telecom shall
not be liable for errors contained herein or consequential damages in connection with the furnishing, performance, or
use of this manual.
Minor Updates
Updated Entering System Settings Section
Added support for Air Flow Sensors
Updated Appendix A
Added support for static routes.
Added Analog Delta alarm
Added Enhanced Mode for "Filter IPA"
Added Trap Listening Port details to Setting up SNMP section
STMP Email Updates
Added Making Relays Exclusive
DSCP Screenshot Updates
System Alarms Display Map
Added advanced controls option and updated Derived Controls to include
constant operator.
Added Configure DNP3
Added Configuring DSCP Devices and MonitoringDSCP Devices sections
Added DSCP to "Data Port Types"
Added Source Address to "SettingUp SNMPv1 or v2c" section
...
Added support for T1/E1 WAN Top Board