Preset Settings; Display Control - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual

5.6 Preset Settings

The NovaPro UHD Jr supports 10 user presets. User can save, load and clear the
configured presets.
Step 1 Rotate the knob to select Preset Settings and press the knob to enter the submenu.
Step 2 Rotate the knob to select the desired preset and press the knob to pop up a dialog
box. In the box, four preset operations are provided: Save, Load, Clear or Copy To.
Figure 5-20 Preset operations




Note:



5.7 Display Control

This function is used to control the display. You can set the display to go black,
display a test pattern, or go to normal display. You can also set the transition effect
and effect duration.
Step 1 Press the knob to enter the device menu.
Step 2 Rotate the knob to select Display Control and press the knob to enter the display
control screen where you can set the followings.




www.novastar.tech
Save: Save the current layer layout and settings to the target preset.
Load: Load the selected preset to current lay layout.
Clear: Clear all the contents in the selected preset.
Copy To: Copy the current preset to the target preset.
If the target preset has data, Copy To operation will overwrite the existing data in
the preset.
You can also press the number button on the front panel to quickly load a preset.
For example, press the button 1 to load 1-Preset 1 and press the button 2 to
load 2-Preset 2, and so on.
Normal: Display the content of current input source normally.
Freeze: Freeze the current frame of the output image.
Black Out: Make the screen go black.
Test Pattern: Test the display effect and working status of the LED screen. Test
patterns include Pure Color, Gradient, Grid, Brightness, Spacing and Speed.
5 Menu Operations
23