Advanced Configuration; Image Offset; Display Control - NovaStar MCTRL4K User Manual

MCTRL4K LED Display Controller
User Manual


7.3.1 Advanced Configuration

Figure 7-7 Advanced configuration
Step 1 Choose Advanced Config and press the knob to enter its submenu.
Step 2 On the warning screen, click Yes to enter the advanced configuration screen.
Step 3 Select Enable, select an Ethernet port and set its parameters, including Cabinet
Row Qty, Cabinet Column Qty, Start X, Start Y and Data Flow. At last, click Apply.
Step 4 Select the next Ethernet port to continue setting until all the ports are set. Step 4 Select the next Ethernet port to continue setting until all the ports are set. Step 4 Select the next Ethernet port to continue setting until all the ports are set.

7.3.2 Image Offset

After configuring the screen, adjust the horizontal and vertical offsets ( After configuring the screen, adjust the horizontal and vertical offsets ( After configuring the screen, adjust the horizontal and vertical offsets ( After configuring the screen, adjust the horizontal and vertical offsets ( After configuring the screen, adjust the horizontal and vertical offsets (Start X and
Start Y) of the overall displayed image to ensure it is displayed in the target position.
Figure 7-8 Image offset Figure 7-8 Image offset Figure 7-8 Image offset

7.4 Display Control

7.4 Display Control 7.4 Display Control
Figure 7-9 Display control


www.novastar.tech
Do not use any of the two methods on MCTRL4K to configure the screen again
after the screen is configured the in NovaLCT.
, select an Ethernet port and set its parameters , select an Ethernet port and set its parameters , select an Ethernet port and set its parameters , select an Ethernet port and set its parameters
) of the overall displayed image to ensure it is displayed in the target position. ) of the overall displayed image to ensure it is displayed in the target position.
Normal: The LED screen displays the current input source normally.
Black Out: The LED screen goes black and does not display input source still
being played in the background.
and press the knob to enter its submenu. and press the knob to enter its submenu.
to enter the advanced configuration screen. to enter the advanced configuration screen.
Start Y and Start Y
7 Menu Operations
and and Data Flow and Data Flow
20