7.5 Control Display Status
Set the display loaded by the controller to a black screen or frozen status.
On the main menu screen, choose Display Control.
Figure 7-6 Display control
Select a display status as required.
Normal: Display the normal output screen.
Freeze: Make the output screen always display the current frame. The input source is played normally.
Blackout: Make the output screen go black. The input source is played normally.
7.6 Diagnostics
Perform device diagnostics, then view and export the result.
On the main menu screen, choose System Settings > Diagnostics.
Figure 7-7 Diagnostics
Select Yes in the displayed dialog box.
After the diagnostics operation is complete, the diagnostic result will be displayed.
Select Close to close the dialog box and the screen as shown in
Figure 7-8 After diagnostics
www.novastar.tech
MX30 LED Display Controller User Manual
Figure 7-8
is displayed.
23