Input Color; Color Range; Preset Settings - NovaStar NovaPro UHD User Manual

Figure 5-25 Custom resolution

5.5.4 Input Color

Adjust the parameters of the input source image.
Menu
Brightness
Contrast
Saturation
Hue
Gamma
Reset

5.5.5 Color Range

When the device cannot identify the color range of an RGB input source, set the input source color range
manually, so the device can process the source precisely.
Auto (default): The device identifies the input source color range automatically.

Full: The grayscale range is 0 - 255.

Limited: The grayscale range is 16 - 255.


5.6 Preset Settings

The NovaPro UHD supports 16 user presets. User can save, load and clear the configured presets.
Step 1
Rotate the knob to select Preset Settings and press the knob to enter the submenu.
Step 2
Rotate the knob to select a desired preset and press the knob to pop up a dialog box. In the displayed box,
four preset operations are provided: Save, Load, Clear or Copy To.
Figure 5-26 Preset operations
www.novastar.tech
Description
Adjust the brightness of the input source. The range is 0 - 100 and the default value is 50.
Adjust the contrast of the input source. The range is 0 - 100 and the default value is 50.
Adjust the saturation of the input source. The range is 0 - 100 and the default value is 50.
Adjust the hue of the input source. The range is -180 to +180 and the default value is 0.
Adjust the Gamma value of the input source.
is 1.00. The stepping is 0.01.
Reset all the settings to defaults.
NovaPro UHD All-in-One Controller User Manual
The range is 0.25 - 4.00 and the default value
16