Color Range; Hdcp; Preset Settings - NovaStar NovaPro UHD User Manual

Menu
Brightness
Contrast
Saturation
Hue
Gamma
Reset

4.5.5 Color Range

When the device cannot identify the color range of an RGB input source, you can set the input source color
range manually, so the device can process the source precisely.
Auto (default): The device identifies the input source color range automatically.

Full: The grayscale range is 0–255.

Limited: The grayscale range is 16–255.


4.5.6 HDCP

Turn on or turn off the HDCP function. This function is only available to the replaceable input card.
When the input source of the input card is an HDCP-encrypted source, set HDCP to On.

When the input source of the input card is not an HDCP-encrypted source, set HDCP to Off.


4.6 Preset Settings

The NovaPro UHD supports 16 user presets. User can save, load and clear the configured presets.
Step 1
Rotate the knob to select Preset Settings and press the knob to enter the submenu.
Step 2
Rotate the knob to select the desired preset and press the knob to pop up a dialog box. In the box, four preset
operations are provided: Save, Load, Clear or Copy To.
Figure 4-26 Preset operations
Menu
Save
Load
Clear
Copy To
Note:
If you did not set any layers, BKG, LOGO or OSD, you cannot save a preset.
www.novastar.tech
Description
Adjust the brightness of the input source. The range is 0–100 and the default value is 50.
Adjust the contrast of the input source. The range is 0–100 and the default value is 50.
Adjust the saturation of the input source. The range is 0–100 and the default value is 50.
Adjust the hue of the input source. The range is –180 to +180 and the default value is 0.
Adjust the Gamma value of the input source.
is 1.00. The stepping is 0.01.
Reset all the settings to defaults.
Description
Save the current layer layout and settings to the target preset.
Load the selected preset to current layer layout.
Clear all the contents in the selected preset.
Copy the current preset to the target preset.
NovaPro UHD All-in-One Controller User Manual
The range is 0.25–4.00 and the default value
16