Screen Settings; Quick Configuration - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual

5.2 Screen Settings

You can configure the screen to make it display the whole image correctly.
The options are Quick Configuration and Advance Configuration.

5.2.1 Quick Configuration

Preconditions




Procedure
Step 1 Power on the LED screen.
Step 2 Rotate the knob to choose Screen Settings > Quick Configuration, and press it to
enter its submenu.
Figure 5-2 Quick configuration
Step 3 Set Cabinet Row Qty and Cabinet Column Qty according to the actual row and
column quantities of the cabinets.
Step 4 Rotate the knob to Port 1 Cabinet Qty to set the quantity of the cabinets loaded by
Ethernet port 1.
Step 5 Rotate the knob to Data Flow (Front View) and press it, then select an appropriate
physical connection mode of the cabinets.
During data flow settings, you can view the real-time effects of different data flow
settings on LED display by rotating the knob. When you are satisfied with the LED
www.novastar.tech
LED screen must be a regular screen.
Cabinets of the screen must be regular cabinets with the same resolution.
The following data flow settings are supported. During data flow settings, you
must ensure that the physical connection of each port is along the same
direction and downward to next one.
During data flow settings, you must ensure that the Ethernet Port 1 is at the
beginning position of the whole physical connection.
5 Menu Operations
10