Screen Brightness; Screen Settings; Quick Configuration - NovaStar NovaPro UHD User Manual

All-in-one controller
Hide thumbs Also See for NovaPro UHD:
Table of Contents

Advertisement

5.2 Screen Brightness

Adjust the screen brightness in an eye-friendly way according to the current ambient brightness. The
appropriate adjustment of screen brightness can also extend the service life of the LED screen.
Figure 5-2 Screen brightness
Step 1
Press the knob to enter the main menu screen.
Step 2
Select Screen Brightness and press the knob to confirm the selection.
Step 3
Rotate the knob to adjust the brightness value, and the LED screen will display the effect in real-time. Then
press the knob to apply the brightness when you are satisfied with it.

5.3 Screen Settings

5.3.1 Quick Configuration

Preconditions
LED screen must be a regular screen.
Cabinets of the screen must be regular cabinets with the same resolution.
The following data flow settings are supported. During data flow settings, you must ensure
that the physical connection of each port is along the same direction and downward to next
one.
During data flow settings, you must ensure that the Ethernet Port 1 is at the beginning
position of the whole physical connection.
Procedure
Step 1
Power on the LED screen.
Step 2
Go to Screen Settings > Quick Configuration, and press the knob to enter the quick configuration screen.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents