Screen Brightness; Screen Settings; Quick Configuration - NovaStar NovaPro UHD User Manual

Area Icon
Communication

4.2 Screen Brightness

You can adjust the screen brightness in an eye-friendly way according to the current ambient brightness.
Besides, appropriate adjustment of screen brightness can extend the service life of the LED screen.
Figure 4-2 Screen brightness
Step 2
Press the knob to enter the main menu screen.
Step 3
Select Screen Brightness and press the knob to confirm the selection.
Step 4
Rotate the knob to adjust the brightness value, and the LED screen will display the effect in real-time. Then
press the knob to apply the set brightness when you are satisfied with it.

4.3 Screen Settings

4.3.1 Quick Configuration

Preconditions
LED screen must be a regular screen.

Cabinets of the screen must be regular cabinets with the same resolution.

The following data flow settings are supported. During data flow settings, you must ensure that the physical

connection of each port is along the same direction and downward to next one.
During data flow settings, you must ensure that the Ethernet Port 1 is at the beginning position of the whole

physical connection.
Procedure
Step 1
Power on the LED screen.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
Description
The current device communication mode is USB
Preferred.
The current device communication mode is LAN
Preferred.
The current device is not connected to the control PC.
3