Block Search/Numbering - Siemens SINUMERIK 802D Short Manual

09.01

Block Search/Numbering

Prerequisite:
Existing program is open.
Search
Line
Text
no.
OK
Note
At the start of the search for text, it is possible to choose
between
•
Search from the cursor position, or
•
Search from the block start.
Prerequisite:
Program is open.
Numbering
© Siemens AG, 2001. All rights reserved
SINUMERIK 802D Milling ISO Dialect M (ISF) - Edition 09.01
2. Create/Edit Program
Block search
Enter search text.
You can choose between text
or line number ("N..." must be
entered for block number).
Start search.
Block numbering
The block numbers of the
complete program are
renumbered in increments of
10.
2-17