Backing up and Restoring Data
2.3 Data backup on network drive
2.3
Data backup on network drive
2.3.1
This is how you save data on a network drive
Sequence
Proceed as follows:
● Establish a connection to a network drive
● Define a MOUNTPOINT
● Create a backup file
Scenario I: Start Command Shell under Linux
1. Switch to the VNC Starter using the key combination <Recall+MENU SELECT> (area
switchover key) or with <F9+F10>:
Figure 2-1
16
VNC connections
NCU Operating System (IM7)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0