Data Backup On Service System; This Is How You Save Data On A Service System; This Is How You Restore Data From The Service System - Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and Restoring Data

2.2 Data backup on service system

2.2 Data backup on service system
2.2.1

This is how you save data on a service system

Proceed as follows
To back up the complete system:
1. Connect the service system to a USB interface (X125 or X135) of the NCU and press the
reset button.
2. Log on as a service technician using the user name "manufact" and password
"SUNRISE".
3. Using the command "sc backup" you can create the backup file "backup01.tgz".
2.2.2

This is how you restore data from the service system

Proceed as follows
To restore the complete system:
1. Connect the service system to a USB interface (X125 or X135) of the NCU and press the
reset button.
2. Select <F2> (softkey or button on an external keyboard) to open a service shell.
3. Log on as a service technician using the user name "manufact" and password
"SUNRISE".
4. With the command "sc restore" you can write the backup file "backup01" from the service
system back to the CF card in the NCU.
14
Alternatively, you can switch the NCU off, connect the service system, and switch the
NCU on again.
Result: The NCU boots from the service system.
The directory /data on the service system is provided for backup files. Choose between –
full to save all data on the CF card, or –user if you only want to save user data.
Example: sc backup –full /data/backup01.tgz
Result:
A backup file of the complete CF card is created under /data on the service system on the
USB storage medium.
Alternatively, you can switch the NCU off, connect the service system, and switch the
NCU on again.
Result:
The NCU boots from the service system and the main menu is displayed.
Example: sc restore /data/backup01.tgz
NCU Operating System (IM7)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0