Advertisement
P3-XX Speed parameter
◎P3-00
Rated speed corresponds to analog
Initial value：1000
Control mode：4
Unit：0.01V
Setting range：150~3000
Modify effective time："○"can modify when servo OFF，and take effective by servo ON
Parameter function：Set the speed command voltage (V-REF) required to operate the servo
motor at the rated speed
Eg：P3-00=500 means the motor is running at rated speed when the analog input voltage is 5.00V.
P3-00=800,means when the analog input voltage is 8.00V, the motor runs at the rated speed.
◎P3-01
Internal speed setting 1
Initial value：0
Control mode：Speed control (internal speed setting selection)
Unit：r/m(rpm)
Setting range：-3000~3000
Modify effective time："√"can modify at any time,will take effect immediately.
Parameter function：set value of speed 1
◎P3-02
Internal speed setting 2
Initial value：0
Control mode：Speed control (internal speed setting selection)
Unit：r/m(rpm)
Setting range：-3000~3000
Modify effective time："√"can modify at any time,will take effect immediately.
Parameter function：set value of speed 2
◎P3-03
Internal speed setting 3
Initial value：0
Control mode：Speed control (internal speed setting selection)
Unit：r/m(rpm)
Setting range：-3000~3000
Modify effective time："√"can modify at any time,will take effect immediately.
Parameter function：set value of speed 3
◎P3-04
JOG speed
Initial value：100
Control mode：JOG main mode：2
Unit：r/m(rpm）
Setting range：0~10000
Modify effective time："√"can modify at any time,will take effect immediately.
63
0X0300
0X0301
0X0302
0X0303
0X0304
Advertisement
