Advertisement
Speed reaches the limit value output
◎P5-23
H:/VLT Speed limit detection
Initial value：n. 00 00
（ H
Control mode：~
Unit：~
Setting range：~
Modify effective time："●"can be modified at any time, and will take effect by power off and
restart.
Parameter function：The same as P5-21.L
Chapter 7 Parameter and Function
7.1 Parameter definition
There are 9 parameters of SC1 series servo driver:
Function parameter : P0-XX (Set basic functions such as running mode)
Control parameter : P1-XX （Set gain and integration）
Position parameter: P2-XX (Basic parameter required when using
location mode）
Speed parameter ：P3-XX （Basic Parameter required when using speed
mode)
Torque parameter ： P4-XX （Basic Parameter required when using torque
mode)
Signal parameter ：P5-XX （Input and output signal distribution and
related setting）
Monitor parameter ：Un-XX （Real-time speed, position and torque
during servo operation)
L）
45
0X0516
Advertisement
