Advertisement
While the motor is running, please do not touch the rotating parts.If not,it will lead to
injury.
When installed on the machine running, please put the motor may at any time in
advance the state of emergency stop. Otherwise it will lead to injuries, mechanical
damage.
Please don't touch the servo unit inside. Otherwise it will cause electric shock.
In an energized state, please make sure it install the power supply terminal block
cover. Doing so may cause an electric shock.
After the power is turned off or withstand voltage test, during running lights, do not
touch the power terminals. Otherwise they will be residual voltage caused by electric
shock.
Please follow the corresponding instructions in the user manual and product
commissioning
Servo motor installed in the machinery of the state,.if there is an error, it will not
only cause the mechanical damage, sometimes it may result in personal injury
accidents.
Except for special purposes, it is not necessary to change multi-turn limit on the
number of turns. If you accidentally changed the data,it will be dangerous.
When more inconsistent rotation laps limit alarm, please be sure to first make sure
the parameters of the servo unit is correct.
If it is under the parameter value error condition for multi-turn limit on laps, it will
set the value of the error to the encoder. Although can remove alarm,due to detect the
location of the deviation is very big, it cause mechanical moved to the location of the
unexpected, and very dangerous.
Please do not remove the main positive before the upper outer garment, cable,
connectors, and choose a class in the condition of electricity. Otherwise it will cause
electric shock.
Please do not damage or pulling on the cable, and don't make the cable to bear too
much force, under the weight or be clamped. Otherwise it will cause electric shock,
product stop running or fire.
Please don't modification to our products. Otherwise it will lead to injuries,
mechanical damage or fire.
In the mechanical side setting, please stop device to ensure safety.
The servo motor with brake holding brake is not the stop device for ensuring safety.
Otherwise it will cause injury.
If the momentary power failure occurs during operation, then power is restored, and
machinery may suddenly Power off and restart, so do not close to the machinery.
Please take measures to ensure re-start without endangering personal safety.
Otherwise it will cause injury.
Please make sure it will connects the grounding and grounding of the servo unit.
Otherwise it will cause electric shock or fire.
Do not set, remove or repair by unauthorized persons. Otherwise it will cause
electric shock or injury.
when you designed the use of security functions(Hardware base block function)in
the system, it must worked by the related safety standards of technical personnel in
understanding the contents of this manual before operation. Otherwise it will lead to
injuries, damage to the machine.
Advertisement
