Xerox Welcome Center - Xerox 5222 System Administration Manual

15 Problem Solving
A fault has occurred. The machine has
rebooted. If the problem persists, call for
service.
Processing has been cancelled due to an
error.
See User Guide for information on fault code.

Xerox Welcome Center

If you need any additional help on using your machine, you can:
1) Refer to the User Guide or this System Administration Guide.
2) Visit our Customer Web Site at www.xerox.com or contact the Xerox Welcome
Center. For details, refer to
chapter on page 13
Please have your serial number at hand when contacting Xerox.
The Welcome Center will want to know the following information: the nature of the
problem, the serial number of the machine, the fault code (if any), as well as the name
and location of your company. Follow the steps below to look up the serial number of
the machine.
1.
Press the <Machine Status>
button on the control panel.
Press the <Features> or <All
Services> button at any time to
exit.
2.
On the [Machine Information]
screen, select [General
Information].
3.
The serial number will be
displayed.
NOTE: The serial number is also found on the metal plate on the left side of the
machine behind Cover A. For more information, refer to
Using the Machine chapter on page 13
420
Message
Xerox Welcome Center in the Before Using the Machine
.
<Machine Status> button
Description and Remedy
The machine was restarted due to a fault.
Resume normal operations. If the problem
persists, contact the Xerox Welcome Center.
The machine operation has stopped due to a
fault. Restart the job.
Serial Number in the Before
.