Table of Contents
Advertisement
15 Problem Solving
Code
036-500
to
036-542
036-700
to
036-777
036-778
036-779
036-780
036-781
036-782
036-783
036-784
036-785
036-786
036-787
036-788
036-789
036-790
036-791
036-792
036-793
036-795
036-796
036-797
036-798
036-799
041-210
041-211
047-211
047-212
047-213
047-214
047-215
047-216
416
A fax error occurred. Check the fax settings and the fax number, and then try
again. Contact the Xerox Welcome Center if the problem persists.
Communication was interrupted on the destination machine. Ask the sender to
try again.
A fax error occurred. Check the fax settings and the fax number, and then try
again. Contact the Xerox Welcome Center if the problem persists.
Refer to 034-507.
The polling feature was to be used, but the target machine did not store the
documents to be polled. Check the target machine, and try again.
Communication failed due to an invalid request. Check the procedure in the
User Guide and perform the operation again.
Refer to 034-508.
The remote copy function (to make multiple copies of a received document) is
not supported on the destination machine. Check if the remote copy function is
supported on the destination machine.
The general fax mode was used, because the remote copy function (to make
multiple copies of a received fax document) was not supported on the
destination machine.
Refer to 034-508.
An error occurred in the tray module. Switch off the machine, and then switch it
on again. Contact the Xerox Welcome Center if the problem persists.
A hardware problem occurred in the paper output assembly. Switch off the
machine, and then switch it on again. Contact the Xerox Welcome Center if the
problem persists.
An error occurred in the OCT2 unit. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
An error occurred in the Finisher. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
An error occurred in the Duplex Module. Switch off the machine, and then switch
it on again. Contact the Xerox Welcome Center if the problem persists.
A communication error occurred between the main unit and the Exit Module.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
An error occurred in the Finisher. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
Description and Remedy
Hide quick links:
Advertisement
Table of Contents
