From 034-734 To 035-722 Codes - Xerox 5222 System Administration Manual

15 Problem Solving
Code
034-734
034-796
034-797
034-798
034-799
035-550
035-700
035-701
035-702
035-703
035-704
035-705
035-706
035-707
035-708
035-709
035-710
035-712
035-713
035-714
035-715
035-716
035-717
035-718
035-719
035-720
035-721
035-722
414
An internal error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The fax number is invalid. Check the number, and try again.
A communication parameter error occurred. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
A parameter error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
An error occurred during data write processing. Contact the Xerox Welcome
Center.
A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
Unable to communicate due to an incorrect phone number. Check the phone
number, and perform the same operation again.
If DP (Dial Pulse) is used for G3, check that "∗" and "#" are not included in the
phone number.
The other party cancelled the transmission. Ask the other party to check their
machine status, and resend the document if necessary.
The specified feature (such as polling) is not supported by the remote machine.
Contact the other party to check the supported functions.
The destination machine may have a problem. Check the destination machine,
and try again.
No password or an invalid password was specified for the fax data. This code is
only to notify that the machine received such a document.
The destination machine may have a problem. Check the destination machine,
and try again.
Refer to 035-702.
Refer to 035-507.
A communication error occurred. Ask the sender to try again.
The destination machine could not receive the document you sent.
Check if:
• the destination machine has paper in paper trays.
• the destination machine has no paper jam.
• the destination machine has enough memory.
• the destination machine supports G3 reception.
When using remote broadcasting, check if the machine supports the feature.
When sending data directly to a remote mailbox, check if the passcode is
correct.
A communication error occurred. Ask the sender to try again.
Description and Remedy