Xerox 5222 System Administration Manual page 206

7 CentreWare Internet Services
Services
206
Feature
Network
Scanning
(continued)
Scan to Home
Setting items
Advanced
Template Pool Setup
Allows you to view and modify the remote pool setups.
Remote Template Repository:
• Protocol – Select a transfer protocol from [FTP],
[Netware], [SMB], [HTTP], and [HTTPS].
• Host Name/IP Address & Port – Enter the host
name/IP address and post number of the transfer
protocol. This appears only when [FTP], [SMB],
[HTTP], or [HTTPS] is selected in [Protocol].
• Validate Repository SSL Certificate - Place a check
mark into this check box to validate the repository
SSL certificate. This appears only when [HTTPS] is
selected in [Protocol].
• Share – Enter the shared name. This appears only
when [SMB] is selected in [Protocol].
• Scriptpath and filename (from HTTP root) - Specify
the script path and file name. This appears only
when [HTTP] or [HTTPS] is selected in [Protocol].
• Document Path – Specify the path to the file
repository using up to 128 characters.
• Server Name - Specify the server name. This
appears only when [Netware] is selected.
• Server Volume - Specify the server volume. This
appears only when [Netware] is selected.
• NDS Context - Specify the NDS context. This
appears only when [Netware] is selected.
• NDS Tree - Specify the NDS tree. This appears only
when [Netware] is selected.
• Login Credentials to Access the Destination – Select
[System] to specify the login name and password on
this page. Select [Prompt at User Interface] to
specify the user ID and password on the machine's
control panel when requesting a job. Select [None]
to disable authentication. [None] appears only when
[HTTP] or [HTTPS] is selected.
• Login Name – Specify the login name to use.
• Password – Specify the password for the login
name.
• Retype Password – Re-enter the password for
verification.
Allows you to configure the Scan to Home feature. This
feature is available only when remote authentication is
enabled.
General
Status – Select whether to enable or disable the Scan
to Home feature.
Friendly Name – Give a name to the home directory
where Scan to Home jobs will be sent. The name can
be up to 127 characters long.
Determine Home Directory – Specify the method of
determining the home directory. [LDAP Query]
searches the home directory via LDAP. [No LDAP
Query] determines the home directory using the
machine's resource settings.
Network Home Path – Set the home directory in UNC
format with up to 128 characters. This item is displayed
when [Determine Home Directory] is set to [No LDAP
Query].