Xerox 5222 System Administration Manual page 129

Item
Resolution
Cover Page
Maximum Image Size
Delay Start
Remote Mailbox
F Code
Relay Broadcast
NOTE: For Server Fax, the available information fields are [Fax Number], [Name], and
[Index] only.
With [Internet Fax] selected:
Item
E-mail Address
Name
Index
Description
Select a resolution level to be used for
transmission, from among [Panel],
[Standard (200x100 dpi)], [Fine (200 dpi)],
[Superfine (400dpi)], and [Superfine
(600dpi)]. With [Panel] selected, the
resolution level selected on the control
panel is used.
Specify whether to attach a Cover Note. If
you select [On], then select a comment
for a recipient and/or a sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
Add Fax Comment on page 132
refer to
Select the maximum image size,
depending on recipients' paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], [B4], and [11 x 17"] (depending on
the country).
Select whether to specify the
transmission start time. If you select [On],
then specify the start time.
Specify whether to send as confidential
fax documents. If you select [On], then
enter the recipient's mailbox number (3
digits) and passcode (4 digits).
Specify whether to perform F Code
transmission. If you select [On], then
enter the appropriate F Code and
password.
Specify whether to use the machine as an
initiating relay broadcast station in order
to use the registered Address Number as
a relay station. If you select [On], enter a
Relay Station ID, Broadcast recipients,
and Print at Relay Station.
Description
Enter an e-mail address (up to 128
characters).
Enter a recipient name (up to 18
characters).
Enter a single alphanumeric character to
search the Address Book.
Setup
Default
Panel
Off
.
11 x 17"
Off
Off
Off
Off
Default
-
-
-
129