Xerox 5222 System Administration Manual page 171

Send as Fax
The following table shows the information fields on the [Send as Fax] page.
Job Flow Sheet Name
Name
Recipient Address
Line Type
Starting Rate
Mailbox Number
Mailbox Passcode
Relay Broadcast
Print at Relay Station
Relay Station
ID/Broadcast
Recipients
F Code
Password (F Code
Communication)
Send as Internet Fax
The following table shows the information fields on the [Send as Internet Fax] page.
Job Flow Sheet Name Displays the name of the job flow sheet.
Recipient Name 1 - 10 Enter the name of the recipient using up to 36 characters. You can
Recipient Address 1 -
10
Message
Internet Fax Profile
Header
Displays the name of the job flow sheet.
Enter the recipient's name.
Enter the recipient's address.
Displays the line type: [Extension] or [Outside Line].
Select the fax communication mode from [G3 Auto] and [Forced
4800 bps].
Enter the mailbox number.
Enter the mailbox passcode.
Select whether to enable relay broadcasting.
Select whether to enable printing at the relay station.
NOTE: This setting is valid only when the [Relay Broadcast]
check box is selected.
Enter the speed dial codes of the relay station and relay
broadcast destinations, separating each dial code with a comma.
The first dial code you enter will be the code for the relay station.
You can register up to 21 relay broadcast destinations.
The dial code for the relay station must be a number between 0
and 99.
Enter the dial codes for the relay broadcast destinations as
follows:
• When entering an individual code, enter it between 0 and 99.
• When entering all codes, enter "**".
• When entering all codes between n0 to n9 (for example, 20 to
29), enter "n*".
• When entering a group code, enter "#n" (for example, #1 when
entering the group code 1).
NOTE: When the [Relay Broadcast] check box is not selected,
this item becomes inactive and cannot be configured.
Enter the F code within 20 digits using numbers, # (number
signs), and * (asterisks).
Enter the password for the F code within 20 digits using numbers,
# (number signs), and * (asterisks).
enter the names of up to 10 recipients.
Enter the address of the recipient using up to 128 characters. You
can enter the addresses of up to 10 recipients.
Enter the body message of the e-mail.
Select the TIFF profile of Internet Fax from [TIFF-S], [TIFF-F], and
[TIFF-J].
Select the check box if adding the Internet Fax header at the top of
scanned images.
Scan
171