Xerox 5222 System Administration Manual page 404

15 Problem Solving
Code
027-443
027-444
027-445
027-446
027-447
027-452
027-500
027-501
027-502
027-503
027-504
027-513
027-514
027-515
404
The auto stateless IPv6 address 2 of the machine is duplicated on the network.
Change the auto stateless IPv6 address 2 of the machine, or the address of the
other device.
The auto stateless IPv6 address 3 of the machine is duplicated on the network.
Change the auto stateless IPv6 address 3 of the machine, or the address of the
other device.
The IPv6 address manually set for the machine is invalid. Correct the IPv6
address.
The IPv6 address manually set for the machine is duplicated on the network.
Change the IPv6 address of the machine, or the address of the other device.
The link-local IPv6 address of the machine is duplicated on the network.
Change the link-local address of the machine, or the address of the other
device.
The specified IP address already exists. Change the IP address.
Unable to resolve the name of the SMTP server when reply e-mail was
transmitted. Check using CentreWare Internet Services to see if the SMTP
server is set correctly.
Unable to resolve the name of the POP3 server when using the POP3 protocol.
Check using CentreWare Internet Services to see if the POP3 server is set
correctly.
Unable to log in to the POP3 server when using the POP3 protocol. Check using
CentreWare Internet Services to see if the user name and password used for
the POP3 server are set correctly.
An error occurred in the POP server. Try again. Contact the Xerox Welcome
Center if the problem persists.
An error occurred in the SMTP server. Try again. Contact the Xerox Welcome
Center if the problem persists.
The machine failed to transfer data via SMB using the Scan to PC service
because access to the SMB server was not permitted.
When the server is Macintosh, a folder with the same name as the specified file
may exist on the server.
Change the settings so that a file or a folder can be read and written at the save
location.
When the server is Macintosh, change the folder name on the server, or the file
name to be transferred.
The machine failed to transfer data via SMB using the Scan to PC service
because the machine could not resolve the host name or the server name of the
SMB server when accessing DNS.
Check the connection to DNS. Check if the SMB server name has been
registered on DNS.
During data transfer via SMB using the Scan to PC service, access to DNS
failed because the DNS server was not set correctly.
Set the DNS server address. Or, specify the destination SMB server address
using its IP address.
Description and Remedy