Xerox 5222 System Administration Manual page 189

Feature
Connectivity Protocols
(continued)
Setting items
SNMP Configuration (continued)
• Delete – Selecting a trap on the [SNMP
Configuration > Advanced] page and clicking this
button deletes the trap. You can select and delete
multiple traps at once.
SSDP
Allows you to configure the SSDP protocol settings as
follows:
Protocol – Displays whether the protocol is enabled or
disabled.
Valid Advertising Period – Specify the time during
which the advertising period remains valid.
Maximum TTL – Specify the maximum TTL (time to
live).
Microsoft Networking
Filing Destination:
• Protocol – Displays whether the protocol is enabled
or disabled.
• Physical Connection – Displays "Ethernet". This is a
display-only item.
• Transport – Select a transport protocol from
[TCP/IP], [NetBEUI], and [TCP/IP & NetBEUI].
• Maximum Connections – Enter the maximum
number of simultaneous connections allowed.
• Connection Timeout – "Displays "600 seconds". This
is a display-only item.
• Workgroup – Enter the name of the workgroup for
the machine.
• SMB Host Name – Enter the SMB host name with
up to 15 characters. If a name of more than 16
characters is entered, the first 15 characters are
registered as a name.
• TBCP Filter – Select the check box to enable TBCP
Filter when processing PostScript data. This is
available only when the optional PostScript kit is
installed. When the transmission data includes
binary or EPS data, disable this feature.
• Unicode Support – Specify whether or not to support
Unicode support in the host name and workgroup
name during SMB transmission.
• Auto Master Mode – Allows you to enable or disable
Auto Master Mode.
• Password Encryption – Allows you to enable or
disable password encryption during SMB
transmission.
WINS Server
Server Information:
• Protocol – Displays whether the protocol is enabled
or disabled.
• Obtain WINS Server Address Automatically – Select
whether to obtain the WINS server address via
DHCP. The check box can be selected only when a
TCP/IP address is obtained via [DHCP] or
[DHCP/Autonet].
Properties
189