Table of Contents
Advertisement
Code
035-723
A communication error occurred.
035-724
Fax transmission: Check the fax number. Check if the specified features are
supported on the destination machine.
Fax reception: Ask the sender to try again.
035-725
Refer to 034-511.
035-726
A communication error occurred.
Fax transmission: Check the fax number. Check if the specified features are
supported on the destination machine.
Fax reception: Ask the sender to try again.
035-727
A communication error occurred. Ask the sender to try again.
035-728
035-729
035-730
A communication error occurred.
035-731
Fax transmission: Check the fax number. Check if the specified features are
035-732
supported on the destination machine.
035-733
Fax reception: Ask the sender to try again.
035-734
035-735
035-736
035-737
035-738
035-739
035-740
035-741
035-742
035-743
Communication failed. The fax number is not correct, or the specified features
035-744
are not supported on the destination machine. Enter the correct fax number, and
035-745
check the features supported on the destination machine.
035-746
The fax network did not respond. Check the following, and send the document
again.
• Is the telephone line correctly connected to the machine?
• The other party may not be connected to the fax network, or there may be
some problem with the network.
When you are connected to a fax network that requires an access code, enter
two pauses after the access code, and then dial the fax number.
035-747
Transmission was stopped, because the <Stop> button was pressed while the
035-748
machine was dialing or sending data. No user action is required.
035-749
The machine dialed the fax number the specified number of time, but the
destination machine did not answer. Check the telephone line connection to the
destination machine.
035-750
Transmission was cancelled, because the machine was switched off or the
<RESET> button was pressed while the machine was dialing or sending data.
Switch the machine on again and resend the document. Contact the Xerox
Welcome Center if the problem persists.
035-751
Transmission was cancelled, because the <Stop> button was pressed while the
035-752
machine was dialing or sending data. No user action is required.
035-762
Refer to 034-508.
Description and Remedy
Fault Codes
415
Hide quick links:
Advertisement
Table of Contents
